DRDER N0. .::3946
RF'F'ROVRL TO RUTHURIZE CUUNTY" JUDGE TO PJEGUTIRTE
SRLE OF SURPLUS JRIL FIXTURES TG
LIhiESTONE COUNTY DETENTION CENTER
On this the c8th day of Rpril 1957, ~-upon motion made by
Commissioner- Let z, seconded by Commissioner Baldwin, the Court
unaniฎously approved by a vote of 4-@-@~ to authori-<e Coy-inty
Judge +.o negotiate sale of surpi~.~s .ja;1 fint~.ires to Limestone
County Detention Center.
P 6?
71
LIMESTONE COUNTY DETENTION CENTER
910 Tyus Street
Groesbeck, Texas 76642
(817)729-E615
FAY (817) 729-8108
April 11. 1997
Honorable Robert A. Denson
Kerr County Judge
700 Main
Kerrville, TX 78028
Dear Judge Denson,

Limestone County Detention Center has a need for some of the bunks, doors, mittors,
kitchen and laundry equipment, and other miscellaneous items located in the closed Kerr County Jail.
We are in a Ixrsition to offer twenty one hundred dollars ($2,100) for this equipment. if you would
like. fur us to pick it up at some tune as we remove the toilets.
Approximately 3 Porcelain Commodes and I Porcelain Urinal ?
Approximately 30 Mirrors. Nr ~/ ~~y & Ir0 ~
.Approximately I L Day Room Tables and approximately 14 Writing Tables. ~t~r'yt/=Cf i~<~
Approximately 20 Bunks. /I/tiW:.2~5:G'a'
Che kitchen equipment: stove, grill and sink~Jrlop. Jd
The laundry equipuent; washer and dryer.~yc~.c7~
Control Room the eyuipmenr. intercoms and control panels. ?
Thanking you for your time and consideration in this matter.
}'ours truly.
^) ~~~"'
Jim Brewer 1 ~ ' y ~t/o V~" '
JB/Id I^q Iv/rw{/"" ~ 7I~ ~~/lP"
O'"
6 Heavy-Duty
Steel
Double Bunks
Like all our steel furnishings,
designed and constructed to
resist abuse and ensure maximun
service life.
Custom Orders Welcome -Call for Information
Technical Information:
• 14-gauge center pans are welded inside 2" x 2" x 1/4" angle iron frames. Pans have eight 7/8-inch
ventilation and drainage holes.
• 10-gauge formed steel legs ate 52 inches high. Each leg has one floor mounting tab with anchor hole at the
bottom.
• Famished cleaned, sanded and painted with one coat lead-free red oxide primer.
• Shipped knocked down for freight economy and easy field installation. Lock-washers and nuts are provided
for bolt-together field assembly. Double bunks can be Geld welded if desired.
• Optional storage drawers can be added - turn ro page # 7 for information and pricing.
All double bunks can be securely anchored to the floor.
Each double bunk requires four anchors for floor attachment.
Turn to page # 8 for selection of optional anchor kits.
Opts
for ]
S
Each
provides?
Technic:
• All-v
• Each
not v
• Each
weld
• 2" x
prevt
All h
to fr
• Drav
from
• Insid
I.en)
Widi
Dept
• Eack
• Fttrn
with

~Ve recommend using
Bob Barker's Flame-Chek'
densified polyester mattresses
with our bunks and beds.
Turn to page # IS for
information and pricing.
Prices F.O.B.
Bob Barker Company, Ine. P.O. Box 429 Fuquay, NC 27526 Toll Free 7-80o.33q.gggp Fmt (919) 552-5097
Rt
We can s
R
Bob Barker 1
2•
Heavy-Duty Pedestal Tables
Tops are fabricated from either 10-gauge steel
or stainless steel -YOUR CHOICE!

Cat. # BB516
Technical Information:
• 12-inch-diameter seat is heavy-duty, highly polished
one-piece cast aluminum. Tamper-resistant fasteners arc
provided for field attachment of seat to the pedestal.
• 4-inch-diameter square steel robing with 18" x 18" x 1/4"
square steel base plate welded to the bottom forms the
pedestal. Each pedestal base has four holes for floor
attachment. One, two and fom-man tables have one
pedestal. The six-man table has two.
• 3-inch-diameter square steel robing welded to the pedestal
forms the seat support.
• All tops have 2-inch lips, and are reinforced with welded
channel tmderneath for added strength and stability. Tops
are fabricated from either 10-gauge steel or stainless steel -
yourchoice. Please refer to the chart below for pricing on
each.
• Tops are factory welded ro pedestals on one and two-man
tables. Four and six-man tables are shipped with tops
detached for freight ecoramy and easy field installation.
Lack-washers and nuts are provided for field assembly.
• All tables are famished cleaned. sarkied and painted with
one coat lead-frce red oxide primer except for seats and
stainless steel tops.
Cat. # BB511
iAr
Cat. # BB512
Cat. # BB514
He
Custom d
Call foI
Like all our
designed an
resist abuse
service life.
Technical Inform
~*; • 10-gauge form
on table tops a
• Famished clew
oxide primer.
• Shippedlmoci
installation. I
-~
All tables mast be eecorely anchored to the floor. Each
pedestal regnlres four anchors for Hoot attachment.
Tura to page # 8 for xlectlou of optloaal anchor kits.
Stainless steel seats are available at no extra
charge. Please add an S to the beginning of
our Cat. # to designate stainless steel seat.
' All tables should
~ requires eight au
selection of opdo
.S
l
e
~lt~ , ~
~lr +~!c
i~ BBPT4,,'•4
aa'~ BBPT6 7•`'ss~
Bob Barker Company, Inc. P.l). Box 429 Fuquay, NC 27526 Toll Free 1-800.334-9880 Fax (919) 552087
Bob Barker Coro
Custom Orders Welcome - Csll for Information
Prices F.O.B. Bob Barker Warehouse

Viirror
t,"
: 11 9/16"
cations '
r
" x 11 9/16" }
x
i
I
Veight Each
5.6 lbs.
for rt
Hooks
:C.'~~, €
ith T-25 bit.
5 each
(919) 552-5097
~I
Collapsible Safety
Clothes Hooks
With 1/4" steel hook and a 10-gauge
bracket, Bob Barker's safety clothes hook is
designed to collapse under a heavy load,
preventing its use for suicidal purposes. An
adjustable friction device permits variation
of factory setting with Cat. # TMD-25
shown on facing page. Standard finish is
cadmium plate.
Mounting hardware is not included.
Storage Shelf with
Collapsible Safety
Clothes Hooks
A convenient, economical unit for combining
storage space for books or other personal
articles with safety clothes hooks. The shelf
(8" x 18") and the back plate (11" x 18") are
made from 1/8" thick steel and welded
together. The exposed edge is folded back on
itself to stiffen the shelf and eliminate sharp
edges. Clothes hooks are blind welded to
bottom part of back plate. The unit is finished
with one coat lead-free red oxide primer.
Each unit weighs 161bs.
Mounting hardware is not included.
49
cat. # BB519 $98.00 each
Custom Orders Welrnme -Call For Information
Unframed Stainless
Steel Mirrors
Units are 20-gauge, mirror-finish stainless steel with
mounting holes in corners. Quarter-inch return edge
and separate masonite backing providesrigidity. /~
Mounting screws are provided.


VIII 1• ~" •I
Prices F.O.B. Bob Barker Warehouse
Bob Barker Company, Inc. P.O. Box 429 Fuquay, NC 27526 Toll Free 1-800-334880 Fax (919) 5525097
- -- - -
rors'
COMMISSIONERS' COURT AGENDA REQUEST
PLEASE FURNISH ONE ORIGINAL AND FIVE COPIES OF THIS REQUEST AND DOCUMENTS
TO BE REVIEWED BY THE COURT.
MADE BY: Robert A. Denson OFFICE: County Judae
MEETING DATE: April 24, 1997 'TIME YKEFERRED:
SUBJECT: (PLEASE BE SPECIFIC)
Consider and discuss sales of old iail fixtures to Limestone Countv Detention Center.
EXECUTIVE SESSION REQUESTED: (PLEASE STATE REASON)
ESTIMATED LENGTH OF PRESENTATION:
IF PERSONNEL MATTER -NAME OF EMPLOYEE:
NAME OF PERSON ADDRESSING THE COURT: Co. Jude
Time for submitting this request for Court to assure that the matter is posted in accordance with Title 5,
Chapter 551 and 552, Government Code, is as follows:
Meeting scheduled for Mondays:
THIS REQUEST RECEIVED BY:
THIS REQUEST RECEIVED ON:
5:00 P.M. previous Monday.

All Agenda Requests will be screened by the County Judge's Office to determine if adequate information has
been prepared for the Court's formal consideration and action at time of Court Meetings. Your cooperation will
be appreciated and contribute towards you request being addressed at the earliest opportunity. See Agenda
Request Rules Adopted by Commissioners' Court.